Thursday, 19 May 2011

Add NIC drivers to ESXi 4

You cannot add drivers to an ESXi installation during the setup process, they must be added after:

1.       Connect to the ESXi host using the vSphere Client and put the ESXi host in to maintenance mode

2.       Download and install the VMware vSphere Command-Line Interface
3.       Download the drivers for your hardware on to the local PC
4.       Load the VMware vSphere CLI and run the following command: –server [HOSTS IP] –username root –install –bundle [PATH TO FILES ON LOCAL PC]

5.       Restart the host, once it’s back up verify you can see the additional NICs and remove it from maintenance mode


  1. This blog is so nice to me. I will continue to come here again and again. Visit my link as well. Good luck
    obat aborsi
    cara menggugurkan kandungan
    obat penggugur kandungan
    obat telat datang bulan

  2. Connect to your drivers and get the result in this place of the technical industry. If you want to survive in the best area, then get the professional essay writing services uk and make sure that you are working in the right manner with the better condition.

  3. Observe that you should enlist Driver Detective first before continuing with the downloading procedure. Epson L565 Driver Printer Download


Correction, question or suggestion, it's all welcome here.